This is an old revision of the document!
PROGRAMMING THE TIMER SET CLOCK AND DAY PM 1. Turn dial to SET CLOCK. 2. Using the +/- buttons, set the time of day, including AM and PM. Timer advances faster if button is held down. 3. Press the ARROW button to set current day. 4. Press the +/- buttons to move between and select the current day of the week. Press the ARROW button to toggle back to the time of day. 5. Turn dial to save changes WATERING SCHEDULES AND START TIMES A B C STATION 1 2 START TIME AM This timer features three customizable watering schedules [A], [B], [C]. A watering schedule may include start times for Station 1, Station 2, or both Station 1 and Station 2. A watering start time is the time of day the timer will begin to water all programmed stations; one after another. NOTE: Only watering schedule [A] is required. Advanced Users may use watering schedules [B] and [C] for additional watering. 1. Turn dial to START TIME. 2. Watering schedule [A] is automatically selected and the time selector will be blinking. NOTE: Timer will not function without at least watering schedule [A] selected. 3. Using the + / - buttons, set the time you want all watering to begin, including AM and PM. Timer advances faster if button is held down. A box is placed around watering schedule [A] noting a start time has been added. NOTE: The timer will not function without at least one start time entered. 4. Both Station 1 and Station 2 are automatically selected (noted by boxes around them) when a start time is added. Both Station 1 and Station 2 will water, one after the other, beginning at your selected start time. To remove a station from watering schedule [A] press the STATION button to cycle through and select Station 1 or Station 2. Press the - button to toggle the station off (removing the box). Press the + button to toggle the station on (adding the box). NOTE: The timer will not function without at least one station selected. 5. Advanced Users - To program watering schedules [B] or [C] press the ARROW button to move through a select {B] or [C]. Selected schedule will be blinking. Repeat steps 3-5 to program additional watering schedules. Use watering schedules [B] and [C] if you need additional watering schedules. 6. Turn dial to save changes and move to the next step. HOW LONG STATION 1 2 MINUTES 1. Turn dial to HOW LONG. 2. Station 1 and the time selector will be blinking. 3. Use +/- buttons to add a 1 to 360 minute watering duration. Timer advances faster if button is held down. A box is placed around Station 1. NOTE: A watering duration is required for Station 1 to water. 4. To select Station 2 press the STATION button. Station 2 and the time selector will be blinking. NOTE: To move between stations press the STATION button