The "To Keep Up" Wiki

A collection of information we find useful

User Tools

Site Tools

Trace:
hole_in_basement_concrete

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
hole_in_basement_concrete [2025.06.28 16:36] – [Sealing a Plumber’s Box Hole Using Nashua 324A Tape] Steve Isenberghole_in_basement_concrete [2025.06.28 16:41] (current) – [Sealing a Plumber’s Box Hole Using Nashua 324A Tape] Steve Isenberg
Line 173: Line 173:
  
 === Interpreting Your Readings === === Interpreting Your Readings ===
- • One-Day Average +  * One-Day Average 
- • Good for quick checks (e.g., after rain, testing HVAC effects). +    * Good for quick checks (e.g., after rain, testing HVAC effects). 
- • Can fluctuate due to weather, barometric pressure, HVAC use, etc. +    * Can fluctuate due to weather, barometric pressure, HVAC use, etc. 
- • Do not make decisions based solely on one-day averages. +    * Do not make decisions based solely on one-day averages. 
- • Seven-Day Average +  * Seven-Day Average 
- • More reliable for assessing your home’s typical radon level. +    * More reliable for assessing your home’s typical radon level. 
- • Use this as your main guide for decisions.+    * Use this as your main guide for decisions.
  
 === Recommended Actions Based on Levels === === Recommended Actions Based on Levels ===
  
 ==== < 2.0 pCi/L ==== ==== < 2.0 pCi/L ====
- • No action needed. +  * No action needed. 
- • Retest every few years or after major home changes.+  * Retest every few years or after major home changes.
  
 ==== 2.0 – 3.9 pCi/L ==== ==== 2.0 – 3.9 pCi/L ====
- • Retest periodically. +  * Retest periodically. 
- • Consider: +  * Consider: 
- • Sealing cracks in foundation and basement. +    * Sealing cracks in foundation and basement. 
- • Improving ventilation. +    * Improving ventilation. 
- • Using fans to increase air exchange. +    * Using fans to increase air exchange. 
- • Avoid prolonged closed-window conditions. +    * Avoid prolonged closed-window conditions. 
- • Proactive action is beneficial but not urgent.+  * Proactive action is beneficial but not urgent.
  
 ==== 4.0+ pCi/L ==== ==== 4.0+ pCi/L ====
- • Professional radon mitigation strongly recommended. +  * Professional radon mitigation strongly recommended. 
- • Mitigation methods: +  * Mitigation methods: 
- • Sub-slab depressurization (most common). +    * Sub-slab depressurization (most common). 
- • Sealing entry points. +    * Sealing entry points. 
- • Crawlspace ventilation (if applicable). +    * Crawlspace ventilation (if applicable). 
- • Typical cost: $800–$2,500 depending on house.+  * Typical cost: $800–$2,500 depending on house.
  
 ==== 8.0+ pCi/L ==== ==== 8.0+ pCi/L ====
- • High priority. +  * High priority. 
- • Immediate mitigation recommended using methods above.+  * Immediate mitigation recommended using methods above.
  
 === Special Situations === === Special Situations ===
- • Selling/Buying a Home: Even borderline levels may be a concern for buyers. +  * Selling/Buying a Home: Even borderline levels may be a concern for buyers. 
- • Young Children or Respiratory Issues: Be more cautious; consider mitigation at moderate levels.+  * Young Children or Respiratory Issues: Be more cautious; consider mitigation at moderate levels.
  
 === Ongoing Monitoring === === Ongoing Monitoring ===
- • After mitigation, consider continuous monitoring to ensure levels remain low.+  * After mitigation, consider continuous monitoring to ensure levels remain low.
  
 ---- ----
Line 222: Line 222:
 A plumber’s box is a rectangular hole in the basement concrete slab, commonly found in older homes (e.g., built in the 1950s). It allows access to sewer pipes beneath the floor. These openings can act as direct radon entry points. A plumber’s box is a rectangular hole in the basement concrete slab, commonly found in older homes (e.g., built in the 1950s). It allows access to sewer pipes beneath the floor. These openings can act as direct radon entry points.
  
---- 
  
 === Do You Need to Keep It Accessible? === === Do You Need to Keep It Accessible? ===
Line 234: Line 233:
   * You’ve had sewer line issues in the past.   * You’ve had sewer line issues in the past.
  
---- 
  
 === Risks of Sealing It Permanently === === Risks of Sealing It Permanently ===
Line 244: Line 242:
 | Continued radon entry if not sealed properly | Moderate | Use proper sealing materials | | Continued radon entry if not sealed properly | Moderate | Use proper sealing materials |
  
---- 
  
 === Recommended Permanent Sealing Steps === === Recommended Permanent Sealing Steps ===
Line 254: Line 251:
   - Optionally embed a capped pipe or box for future access.   - Optionally embed a capped pipe or box for future access.
  
---- 
  
 === Temporary Covering Option (Short Term) === === Temporary Covering Option (Short Term) ===
Line 267: Line 263:
 **Note:** This is only a temporary measure. It is not airtight and should not be considered a permanent radon mitigation solution. **Note:** This is only a temporary measure. It is not airtight and should not be considered a permanent radon mitigation solution.
  
---- 
  
 === Summary === === Summary ===
Line 276: Line 271:
  
  
----- 
  
 ====== Sealing a Plumber’s Box Hole Using Nashua 324A Tape ====== ====== Sealing a Plumber’s Box Hole Using Nashua 324A Tape ======
Line 282: Line 276:
 === Purpose === === Purpose ===
 Temporarily or semi-permanently seal an open plumber’s box hole in the basement floor to reduce radon entry and soil gas infiltration. Temporarily or semi-permanently seal an open plumber’s box hole in the basement floor to reduce radon entry and soil gas infiltration.
- 
---- 
  
 === Materials Needed === === Materials Needed ===
Line 291: Line 283:
   * Wooden board (to cover and protect the plastic sheeting)   * Wooden board (to cover and protect the plastic sheeting)
   * Weights (e.g., concrete block or heavy object)   * Weights (e.g., concrete block or heavy object)
- 
---- 
  
 === Preparation === === Preparation ===
Line 300: Line 290:
     * Allow surface to dry fully for better tape adhesion.     * Allow surface to dry fully for better tape adhesion.
   - Cut plastic sheeting large enough to cover the hole and extend at least 6–12 inches beyond the hole edges onto clean concrete.   - Cut plastic sheeting large enough to cover the hole and extend at least 6–12 inches beyond the hole edges onto clean concrete.
- 
---- 
  
 === Sealing Steps === === Sealing Steps ===
Line 313: Line 301:
   - Place the wooden board on top of the sealed plastic for extra protection.   - Place the wooden board on top of the sealed plastic for extra protection.
   - Set weights on top of the board to prevent accidental shifting.   - Set weights on top of the board to prevent accidental shifting.
- 
---- 
  
 === Notes === === Notes ===
Line 321: Line 307:
   * Nashua 324A is suitable for this application due to its high adhesion, vapor barrier properties, and UL certification.   * Nashua 324A is suitable for this application due to its high adhesion, vapor barrier properties, and UL certification.
   * This setup allows for later permanent sealing if necessary.   * This setup allows for later permanent sealing if necessary.
- 
---- 
  
 === Long-Term Options === === Long-Term Options ===
hole_in_basement_concrete.1751153763.txt.gz · Last modified: by Steve Isenberg